Products

Control Valve Pressure Reducing Valve is designed with anti-cavitation for application where there is high potential for damage from cavitation, which provides optimum internal pressure control

Pressure Reducing/Pressure Regulating Valve (PRV) automatically reduces a higher inlet pressure to a steady lower downstream pressure, regardless of changing flow rate and/or varying inlet pressure

They are designed and manufactured in accordance with the requirements of ASME Boiler and Pressure Vessel Code, Section VIII. The discharge coefficient is certified by the American National Board of

Pressure Vacuum Relief Valve is widely used for oil, petrochemicals, natural gas and other industries to protect pressure equipment.

Pilot Operated Vacuum Relief Valve can be used to maintain the pressure of the tank in the normal state and to reduce the evaporation losses of volatile liquid inside the tank.

Size. NPS 2-12 (DN50-300)Pressure Rating: Class 150~600(PN16~100)Base Matriat ASTMA105. A350LF2, A182 F304. A182 F316. A182 F6A. A182 F51.A182 F53, A182 F5. A54 630(17-4PH), Monel, Inconel.

Trunnioun Mounted Ball has double closure and discharge function. The fixed ball valve adopts spring pre-installed floating seat, and when the valve is fully open or fully closed, the upstream and

Brief introduction of Pressure Vacuum Relief Valve Summarize Pressure vacuum valve is a kind of air breather which install on the petrochemical fixed storage tank,in order to avoid tank over the

Integrated Intelligent Elector-hydraulic Actuator is designed to meet the automatic and safety control demands in industry.

Heavy-duty Scotch Yoke Actuator is designed and manufactured to provide the highest cycle-life for the rotated valve.

AT Rack And Pinion Pneumatic Actuator has compacted design and it is widely adopted for rotated valve with small torque needed.

Double Block and Bleed Valve is a side-entry ball valve, with either a bolted or welded body, designed for use in upstream, midstream and downstream oil and gas applications. It requires two in-line